-
thermally insulated system used to design roofs of complex-shape garden rooms; the system is dedicated to Victorian winter gardens
-
technical description:
- rafter fixed in the eave and the ridge using pinned hinge fasteners
- engineered corner joints of various angles: convex and concave;
- available valley beams and rafter blocks (rafter of various heights to obtain a span of the winter garden roof from 1,8 m to 4,5 m.)
- separate gutter fixed to the eave profile using hangers providing a slope and a separate eave profile
- gutter and eave profile provided with fasteners: the most typical angles 90°, 135° and 150°
- for typical angles, there are engineered blocks, i.e. spots where many rafters are joined
- option of installation above and below gutters – profiles and ornamental elements (decorative combs, structural ties, enclosures of discharge chutes)
- Victorian Plus is a system suitable for filling made of wall polycarbonate as well as glazed units -
the system is fully compatible with other Aliplast systems used to construct fillings of winter garden walls, including non-openable glazing, lift-and-slide doors, tilt-and-slide doors, accordion doors and windows
-
the VT system satisfies requirements relating to profile thermal insulation, rainwater and air tightness; it also guarantees proper ventilation provided appropriate ventilation equipment is used, regardless of weather conditions
-
a wide range of colours available - RAL palette (Qualicoat 1518), structural colours, Aliplast Wood Colour Effect (Qualideco PL-0001), anodized (Qualanod 1808), bi-colour
Technical Drawings
VT Edwardian
VT Gregorian
VT Kiosk
VT Lean-to
VT Victorian
2. ALIVER 200
-
a thermally insulated system used to design roofs of garden rooms, mainly singleand double-pitched roofs
-
the system is fully compatible with other Aliplast systems used to construct infills of winter garden walls, including non-openable glazing, lift-and-slide doors, tilt-and-slide doors, accordion doors and windows
-
the system features thermal performance of ~2.0 W/m2K
-
the Aliver 2000+ system satisfies requirements relating to profile thermal insulation, rainwater and air tightness; the system also guarantees proper ventilation provided appropriate ventilation equipment is used, regardless of weather conditions
-
a wide range of colours available - RAL palette (Qualicoat 1518), structural colours, Aliplast Wood Colour Effect (Qualideco PL-0001), anoda (Qualanod 1808), bi-colour
-
Technical description of the system:
- load-bearing element of the structure located inside (below the infill), anchors fixed to a depth of 105 mm or 125 mm
- rafters and external masking caps available as soft (rounded) and with distinct rectangular shapes
- variety of gutter shapes, option to install gutter mesh guards to prevent undesired accumulation
- available system discharge chutes, optionally to be enclosed;
- option to reinforce the rafter and gutter beams using aluminium or steel shaped sections
- the system offers articulated joints in the gutter and roof ridge beams, engineered ties, gutter and discharge chute connectors
- roof plane pitch 5-45°
- the Aliver 2000+ system is suitable for infills made of wall polycarbonate as well as glass (single, double and triple glazed)
Technical Drawings
Options available of external and internal strips
Options available of external and internal strips
Joint passing through the wall and the roof
of the VR2000 structure
Options available of external and internal strips
Options available of external and internal strips
Joint passing through the wall and the roof
of the VR2000 structure
3. TERRASSENDACH
-
roof system without thermal insulation
-
the Terassendach system is suitable for infills made of wall polycarbonate and glazing units (single, double and triple glazing)
-
available options of the system:
- eave with load-bearing rafter from the external side
- pyramidal roof with various types of the load-bearing rafter (fixed externally)
- double-pitched roof with external rafter
- roof with valley gutters and external rafter -
technical description:
– span between two rafters up to 600 cm
– depth of the load-bearing rafter up to 600 cm*
* assumptions: VSG 10 mm, span between rafters 80 cm, snow load 85 kg/m2, deflection coefficient L/200
- load-bearing structure with various gutter solutions
- option to install solar shading devices to lateral structure beams
- a wide variety of gutter solutions
- roof pitch from 5 to 25 degrees
- option to attach lighting through a terminal strip
- quick prefabrication -
a wide range of colours – RAL palette (Qualicoat 1518), structural colours, Aliplast Wood Colour Effect (Qualideco PL-0001), anodized (Qualanod 1808) and bi-colour
Technical Drawings
Joint passing through wall and the roof
Option of glazing with strip
Option of glazing with flexible seal